Fix “Wi-Fi Doesn’t Have a Valid IP Configuration” Error

How To Fix “Wi-Fi Doesn’t Have a Valid IP Configuration” Error

You’ve probably been experiencing the “Wi-Fi Doesn’t Have a Valid IP Configuration” a few too many times to count. Luckily, we have just the solution you need in this article!

Wi-Fi is great – it’s fast and convenient, and you can use it almost anywhere. However, it just has one problem i.e., it’s quite fragile at times. In this blog post, we’ll explore how to fix the most common Wi-Fi problems, including that pesky “Wi-Fi doesn’t have a valid IP configuration error.”

What Is a “Wi-Fi Doesn’t Have a Valid IP Configuration” Error?

A “Wi-Fi Doesn’t Have a Valid IP Configuration” error means that your PC or device is unable to connect to your Wi-Fi network peacefully. This error mostly arises when your system falls short to secure a functioning IP address over Wi-Fi.

It can be caused by a number of other things as well. Fortunately, there are several methods you can perform to fix this error. We will be mentioning them in detail next. So, keep reading guys!

Methods to Fix a “Wi-Fi Doesn’t Have a Valid IP Configuration” Error

\"Wi-Fi

By Power Cycling Your Router

This is one of the best techniques that can be used to solve the problem of interest i.e., “Wi-Fi Doesn’t Have a Valid IP Configuration”. For this, all you need to do is power off your router completely and then wait for around 10-30 seconds. Then, proceed with powering it on again. Now, once it is successfully turned on, go on and connect your PC with your desired Wi-Fi network. Then check, if you are now able to surf the internet.

By Reinitializing Wireless Network Adapter

Most people have mentioned this as one of the methods that have assisted them in coping with not only this error but many other internet-related problems. Here is how to reset Wireless Network Adapter step-by-step.

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, from the context menu click on the option labeled Run. You can also use the shortcut keys i.e., Windows + R to successfully launch the Run box.
  3. After that, inside this box type in the following command i.e., ncpa.cpl
  4. Now, press the Enter key on your keyboard or click on the OK button available in the Run box to execute the typed-in command successfully.
  5. Next, once the command is run completely, you will see a new window pop-up on your screen with the label Network Connections.
  6. After that, right-click on your Wi-Fi option followed by clicking on Disable from the context menu.
  7. Now, wait for around 10-30 seconds. 
  8. Finally, right-click on this option again, followed by clicking on Enable option this time. Then, check to see if the error is resolved now, or still persists.

By Revitalizing Your PC’s IP Lease

You can also give this method a chance. Maybe this will prove beneficial in your case. Follow the below-mentioned guide in order to renew your PC\’s IP lease successfully and get rid of this dreadful error.

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, from the context menu click on the option labeled Windows Powershell. Alternatively, you can also use the shortcut keys i.e., Windows + X to successfully open the start context menu.
  3. After that, execute the next-mentioned commands inside the Windows Powershell in sequential order. Then, proceed with closing the Windows Powershell.
  • ipconfig /release
  • ipconfig /flushdns
  • ipconfig /renew

By Resetting the TCP/IP Stack

If you have spent hours trying to fix this error i.e., “Wi-Fi Doesn’t Have a Valid IP Configuration”, but you are still not victorious in your efforts, then go on and try resetting the TCP/IP Stack. Most probably this will work for you. Here\’s how to do it.

1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.

2. Next, from the context menu click on the option labeled Windows Powershell (Admin).

3. After that, execute the below-mentioned commands one-by-one while pressing the Enter key on your keyboard.

  • netsh winsock reset catalog
  • netsh int ip reset

4. Now, close the Windows Powershell (Admin) and proceed with rebooting your PC.

5. Finally, as soon as your system restarts, check to see if the error is resolved or not.

By Acquiring the IP Address Automatically

If you are among the ones who customize their IP address to addresses like Google IP address or some other, then revert to default settings. Here is what you need to do.

  1. First, right-click on the Windows icon appearing in the bottom left-hand corner of your PC screen.
  2. Next, from the context menu click on the option labeled Run.
  3. After that, inside this box type in the following command i.e., ncpa.cpl
  4. Now, press the Enter key on your keyboard to execute the typed-in command successfully.
  5. Next, once the command is run completely, you will see a new window pop-up on your screen with the label Network Connections.
  6. After that, right-click on your Wi-Fi option followed by clicking on Properties from the context menu.
  7. Now, a new window will pop up on the screen with the label Wi-Fi Properties. Inside this window, click on the tab named Networking followed by double-clicking the Internet Protocol Version 4 (TCP/IPv4) option.
  8. Next, click on the radio buttons on the left-hand side of the Obtain an IP address automatically and Obtain DNS server address automatically options to enable them.
  9. Finally, click on the OK button present at the bottom to successfully apply the made changes. Repeat steps 7-9 for Internet Protocol Version 6 (TCP/IPv6) as well.  

Surely this will solve your problem, and you will be enjoying a stable internet connection once again in no time.

Some Other Tips & Tricks to Deal With This Error Effectively

  • By Uninstalling and Then Reinstalling the Wireless Network Adapter
  • By Updating the Wireless Network Adapter More Frequently
  • By Switching the Router’s SSID and Passcode
  • By Launching the Network Adapter Troubleshooter
  • By Changing Your PC’s Network Settings to Default

See also: How to access WiFi password on Windows 11

Conclusion

If you\’ve been struggling with the “Wi-Fi Doesn’t Have a Valid IP Configuration” error, then we hope this article has helped you to resolve the issue. This error can be frustrating, but it is usually relatively easy to fix.

In most cases, simply restarting your PC or router will do the trick. However, if that doesn\’t work, then you may need to release and renew your IP address or reset your TCP/IP stack. Whatever method you end up using, we pray it helps you to get back online and enjoy using your Wi-Fi connection once again.

Have you ever tried to fix this error by yourself? Whether you are successful in doing it or not? Which method did you use to perform this task? Have any of our explained methods worked for you? If you have done this before, share your experience with us in the comments section below.

You are also free to ask any questions or queries you have in your mind that are bothering you. We will appreciate it and try to answer them in the best possible manner. Overall, if you liked this guide, give it a thumbs up and share it with your friends and loved ones. Thank you all in advance guys and stay blessed forever.

Leave a Comment

Your email address will not be published. Required fields are marked *